Duplex Unit
The Duplex Unit (Sharp
Installing the Duplex Unit
1.Switch off the printer and disconnect the power cable.
2.Open the front cover (1).
3.Insert the duplex unit (2) into the printer engaging the sides of the duplex unit in the slots in the printer.
4.Gently slide the duplex unit (2) fully into the printer.
5.Close the front cover (1).
6.Connect the power cable and switch the printer on.
7.The printer will automatically configure to include this option.
8.Engage the Duplex Unit in the printer driver(s): see the instructions supplied with your Duplex Unit.
Sharp