System Adjust Menu (continued)
The default settings are bold.
Item | Value | Description |
HEX DUMP | EXECUTE | Press SELECT to switch the |
|
| printer to the Hexadecimal Dump |
|
| mode in which all data received is |
|
| printed in both Hexadecimal and |
|
| ASCII format. To return to normal |
|
| print mode, switch the printer off |
|
| then on again. |
Item
EEPROM RESET
SAVE MENU
RESTORE
POWER SAVE
PAPER BLACK SETTING
PAPER COLOR SETTING
TRANSPR BLACK SETTING
TRANSPR COLOR SETTING
Maintenance Menu
The default settings are bold.
Value | Description |
EXECUTE | Initializes EEPROM for each unit. |
EXECUTE | Saves the current menu settings. |
EXECUTE | Reverts to stored menu settings. |
| (Only displayed if there are saved |
| menu settings). |
ENABLE; DISABLE | When no input is received for a |
| specified time, the printer will enter |
| Power Save Mode. See also |
| “Power Save Delay Time” under |
| the System configuration menu on |
| page 45. |
0; +1; +2; | Not normally used. |
0; +1; +2; | Not normally used. |
0; +1; +2; | Not normally used. |
0; +1; +2; | Not normally used. |
Sharp