34
TROUBLESHOOTING AND MAINTENANCE
MISFEED IN TRAY 2
1Open the side cover.
Grasp the handle to open the
side cover.
2Remove the misfed paper.
Be careful not to tear the misfed
paper during removal.
3If there was no misfed paper in step 2,
pull out tray 2 and remove the misfed
paper.
Be careful not to tear the misfed
paper during removal.
4Gently close the side cover.
The message " Clear paper
path." will be cleared and
copying will be possible.
5Gently push tray 2 into the machine.
Push the tray in completely.
• Make sure that there is no misfed paper in the tray before pulling it out. (Page 31)
• Also use the following procedure to remove misfeeds that occur in the 250-sheet paper feed unit and the 2 x
500-sheet paper feed unit.
Note
If the message does not clear, check again
to make sure that no pieces of paper
remain.
Side cover
Note
Side cover
2 x 250-sheet paper feed unit (AR-D25)