SPECIAL MODES
5-10
5Press the [START] key.
NOTES
●To perform tandem copying, the server machine and client machine must meet certain conditions.
After the [START] key is pressed on the server machine, the server machine verifies tha t the conditions have
been met. If the conditions have not been met, tandem copying does not begin a nd "TANDEM OUTPUT IS
NOT ALLOWED. OUTPUT ALL SETS USING MASTER MACHINE?" appears in the display. To have the
server machine make all the copies, touch the [OK] key. To cancel the job, to uch the [CANCEL] key.
• As an example, the following conditions must be met when a staple finisher is installed on the serv er machine
and not on the client machine:
(1) If tandem copying is executed for a two-sided copy job with the number of c opies set to 999 and "Non-
staple" is selected, tandem copying will take place.
(2) If tandem copying is executed for a two-sided copy job with the number of c opies set to 999 and
"Staple" is selected, tandem copying will not take place because the client machine does not have a
finisher.
●After the [START] key is pressed, if the client machine cannot print because i t is out of paper or other reason,
the server machine will print its half of the job. The other half of the job will be stored in th e client machine and
the job will be printed when the client machine is able to print.
●If auditing mode is enabled on both the server and client machines, the same account number m ust be entered
on both machines.
●If auditing mode is enabled on the client machine but not on the server machine, tande m copying cannot be
performed.
To cancel the tandem copy function, touch the
[TANDEM COPY] key on the special modes screen
(step 2). The highlighted display will be canceled.