LOADING PAPER
2-10
■
■■
■Loading transparency film
Be sure to load the transparency film with the white label side up. Make sure no i mage will be printed on the label.
Printing on the label may cause smudges on prints. Transparency film mu st be set in the portrait orientation.
Specifications (multi purpose drawer)
Specifications are subject to change for improvement without notice.
Loading paper in the stand/3 x 500 sheet paper drawer
Upper paper tray:
The upper tray is the same as the multi-purpose drawer. Use the upper tray according to the instru ctions for the
multi-purpose drawer on page 2-8.
Middle and lower paper trays:
Up to 500 sheets of SHARP recommended plain paper can be loaded in these trays. The method of loading paper
is the same as for paper tray 1 in the main unit. See the description (page 2-2).
Specifications (stand/3 x 500 sheet paper drawer)
Name Multi purpose drawer
Paper size/weight See specifications of paper trays on page 2-3.
Paper capacity 500 sheets (20 lbs. (80 g/m2 )) of paper, 40 envelopes, 40 postca rds, 40 sheets
of transparency film
Dimensions 25-3/4" (W) x 22-21/64" (D) x 5-43/64" (H)
(654 mm (W) x 567 mm (D) x 144 mm (H))
Weight Approximately 24.3 lbs. or 11 kg
NOTE
If the paper size or paper type is changed in either paper tray, the tray settings must be ch anged in custom settings.
Refer to "Setting the paper type and paper size" on page 2-5.
Name Stand/3 x 500 sheet paper drawer
Paper size/weight See specifications of paper trays on page 2-3.
Paper capacity
(ordinary paper) 500 sheets (20 lbs. (80 g/m2 ) each
Dimensions 24-3/8" (W) x 26-5/32" (D) x 15-29/32" (H)
(619 mm (W) x 664 mm (D) x 404 mm (H))
Weight Approximately 70.6 lbs. or 32.9 kg