SADDLE STITCH FINISHER
3-22
Misfeed in the saddle stitch finisher
When a misfeed occurs in the saddle stitch finisher, remove the misfed paper fol lowing the procedure below.
1Press the detach button and separate the
saddle stitch finisher from the machine.
2Remove any misfed paper from the
machine.
3If there was no misfed paper in step 2, pull
roller rotating knob B on the punch unit
toward you and rotate it. (Only when an
optional punch unit is installed.)
Rotating roller rotating
knob B releases the
caught paper.
4Open the top cover.
5Remove the misfed paper.
Remove the paper
gently, taking care not to
tear it.
6Close the top cover.
7Remove any misfed paper from the stapler
compiler.
Remove the paper
gently, taking care not to
tear it.
8Open the cover of the saddle stitch
section.
9Remove the misfed paper.
Remove the paper
gently, taking care not to
tear it.
CAUTION
The saddle stitch finisher and the machine are
connected at the rear. Exercise caution when pulling
them apart.
Roller rotating
knob B