BEFORE OPERATING
TO SET DATE AND TIME
1After touching Set Clock or Clock, enter the correct month by touching Month repeatedly. The month appears in the banner at the top of the display. When set for the correct month, touch ENTER.
3Enter the time by touching the number pads. Select AM/PM and then touch ENTER.
Note:
2Enter the date by touching the number pads on the control panel. Example: for June 1, touch 01. Check the date in the banner, then touch ENTER.
4The month, date and time will appear in the banner. The display will return to the Home Page.
•If you make a mistake while setting the clock, touch Stop/Clear pad. The Home Page will appear. To set clock again, touch Setup pad on the control panel. Then touch Clock and follow the directions.
•If you want to change the setting of the time of day, touch Setup pad and follow the directions.
•If the electrical power supply to your Cooktop+Microwave Drawer should be interrupted, the screen will intermittently show Video Demo or Set Clock after the power is reinstated. If this occurs during cooking, the program will be erased. Simply touch Set Clock and follow the directions.
•If the month, date and time are not set, “MICROWAVE DRAWER” will appear in the banner.
STOP/CLEAR
Touch the Stop/Clear pad to:
1Erase if you make a mistake during programming.
2Stop the Microwave Drawer temporarily during timed cooking.
3To cancel a program during cooking, touch twice for timed cooking.
OPEN OR CLOSE MICROWAVE DRAWER
ALWAYS touch the OPEN or CLOSE pad on the control panel to open or close the Microwave Drawer.
Do not push or pull the Microwave Drawer by hand, except in case of emergency such as a power failure. If necessary, push or pull slowly.
11