24
Basic Adjustment Settings (Continued)
I/P SETTING
Adjusting the image and input signal can give you a more
beautiful picture.
Press MENU to display the Menu screen.
Press \/|to select “PICTURE”.
Press '/"to select “ADVANCED”, and press ENTER.
MENU[
MENU[
PICTURE
…ADVANCED]
PICTURE
S
AUDIO
SETUP
OPTION
AV MODE [DYNAMIC]
OPC [OFF]
BACKLIGHT [
BRIGHT
]
CONTRAST [ 56]
BRIGHTNESS[ ]– +
COLOR [+ 2]– +
TINT [
TINT [
]
SHARPNESS [+ 4]– +
ADVANCED
RESET
0
0
Press '/"to select “I/P SETTING”, and press ENTER.
MENU[
MENU[
PICTURE
…ADVANCED]
SELECT OPTION
SELECT OPTION
COLOR TEMP.
RED [ ] I NT ER LA CE
GREEN [ ]
BLUE [ ] PROGRESSIVE
I/P SETTING
NOISE CLEAN
FILM MODE
RE S E T
0
0
0
Press '/"to select “INTERLACE” or “PROGRESSIVE”,
and press ENTER.
Press MENU to exit.
A
• “I/P SETTING” cannot be set when 480P, 576P, 720P or 1080I
signal or no signal is received from the COMPONENT terminals.
3
Selected item
INTERLACE
PROGRESSIVE
Description
Use this setting when you cannot get a clear
picture with PROGRESSIVE. (Especially suitable
for media with special effects like game software.)
Normally, you should select this setting.
NOISE CLEAN
Produces a clearer video image.
Repeat Steps 1to 3of I/P SETTING.
Press '/"to select “NOISE CLEAN”, and press ENTER.
MENU[
MENU[
PICTURE
…ADVANCED]
SELECT OPTION
SELECT OPTION
COLOR TEMP.
RED [ ] O N
GREEN [ ]
BLUE [ ] OFF
I/P SETTING
NOISE CLEAN
FILM MODE
RE S E T
0
0
0
Press '/"to select “ON”, and press ENTER.
Press MENU to exit.
A
• “NOISE CLEAN” cannot be set when 1080Ior 720P signal or no
signal is received from the COMPONENT terminals.
• ”NOISE CLEAN” cannot be adjusted when “I/P SETTING” is set to
“INTERLACE”.
FILM MODE
Automatically detects a film-based source (originally encoded
at 24 frames/second), analyses it, and then recreates each
still film frame for cinematic picture quality.
Repeat Steps 1to 3of I/P SETTING.
Press '/"to select “FILM MODE”, and press ENTER.
MENU[
MENU[
PICTURE
…ADVANCED]
SELECT OPTION
SELECT OPTION
COLOR TEMP.
RED [ ] O N
GREEN [ ]
BLUE [ ] OFF
I/P SETTING
NOISE CLEAN
FILM MODE
RE S E T
0
0
0
Press '/"to select “ON”, and press ENTER.
Press MENU to exit.
A
• Set “FILM MODE” to “ON” manually to detect a film-based source
(originally encoded at 24 frames/second) when the input source
has vertical frequency of 50 Hz (e.g. PAL, SECAM, etc.).
•
“FILM MODE” cannot be set when 480P, 576P, 720P or 1080
I
signal
or no signal is received from the COMPONENT terminals.
1
2
4
5
6
2
3
4
1
2
4
3
1