Basic adjustment settings

EZ Setup

You can run EZ Setup again, even after setting up the preset channels.

Language setting

Select from among 3 languages: English, French and Spanish.

Press

to display the MENU screen,

1and then press c/d to select “Setup”.MENU

Press a/b to select “EZ Setup”, and then

2press ENTER.

•If you already set the Secret No., go to step 3. If not, skip to step 4.

3Input the 4-digit secret number by using 0–9.

Press a/b to select the desired language

4listed on the screen, and then press ENTER.

Antenna setting

Make sure what kind of connection is made with your TV when selecting “Air” or “Cable”.

5Press c/d to select “Air” or “Cable”. Press ENTER to enter the setting.

Channel search

Channel auto search makes the TV look for all channels viewable in the set area.

When “Air” is selected in Antenna

6setting:

Press c/d to select “Start”, and then press

ENTER.

When “Cable” is selected in Antenna setting:

Press a/b to select “Analog & Digital Search Start” to search both analog and digital broadcasts or “Analog Search Start” to search only analog broadcasts, and then press ENTER.

•The Channel search will start automatically.

•To exit the Channel search screen, select “Cancel”, and then press ENTER.

7Press MENU to exit.

NOTE

•If no channel is found, confi rm the type of connection made with your TV and try EZ Setup again.

•If you select “Analog Search Start” and initiate the channel search, the CH Memory for Cable Digital will be deleted.

Channel Setup

If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.

Antenna setting

Press

to display the MENU screen,

1and then press c/d to select “Setup”.MENU

Press a/b to select “CH Setup”, and then

2press ENTER.

•If you already set the Secret No., input the

4-digit secret number here. See page 39 for setting a secret number.

Press a/b to select “Air/Cable”, and then

3press ENTER.

4Press c/d to select “Air” or “Cable”. Press ENTER to enter the setting.

5Press MENU to exit.

Channel search

Channel auto search makes the TV look for all channels viewable in the set area.

Repeat steps 1 to 2 in Antenna setting in

1Channel Setup.

Press a/b to select “CH Search”, and then

2press ENTER.

When “Air” is selected in Antenna

3setting:

Press c/d to select “Start”, and then press

ENTER

When “Cable” is selected in Antenna setting:

Press a/b to select “Analog & Digital Search Start” to search both analog and digital broadcasts or “Analog Search Start” to search only analog broadcasts, and then press ENTER.

•The Channel search will start automatically.

•To exit the Channel search screen, select “Cancel”, and then press ENTER.

4Press MENU to exit.

NOTE

•If no channel is found, confi rm the type of connection made with your TV and try channel search again.

•If you select “Analog Search Start” and initiate the channel search, the CH Memory for Cable Digital will be deleted.

22