Supplied accessories
Make sure the following accessories are provided with the product.
Remote control unit | “AAA” size battery | AC cord | Cable Clamp (g2) | Stand unit | Operation manual |
(g1) | (g2) | (g1) | Cable tie (g1) | (g1) | (g1) |
Page 8 | Page 8 | Page 7 | Page 7 | Page 6 |
|
NOTE
• Always use the AC cord supplied with the TV.
QUICK REFERENCE
Attaching the stand
•Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
•Attach the stand in the correct direction.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1Confi rm that there are 8 screws (4 short screws and 4 long screws) supplied with the TV.
31 Insert the stand into the openings on the bottom of the TV.
2 Insert and tighten the 4 long screws into the 4 holes on the rear of the TV.
| Attach the two parts of the stand unit to each | Hex key |
2 |
| |
other using the 4 short screws and the hex |
| |
| key (supplied with the product) as shown. | Long screw |
Soft cushion
Short screw
NOTE
Hex key | • To detach the stand, perform the steps in reverse order. |
|
6