Useful adjustment settings

How to temporarily release the

V-CHIP BLOCK

When the V-CHIP BLOCK is working and censors a broadcast, “V-CHIP HAS BEEN ACTIVATED.” displays.

1

Press ENTER while the V-CHIP is working,

and then the secret number setting menu

 

displays.

2

Input the 4-digit secret number by using 0–

9. At this time V-CHIP BLOCK temporarily

 

 

releases.

Reactivating the temporarily released V-CHIP BLOCK

You can reactivate the temporarily released V-CHIP BLOCK as shown below.

Method 1:

Select “Status” setting from the Parental CTRL menu to reactivate BLOCK. (See page 41.)

Method 2:

Select “V-Chip” setting (“MPAA”, “TV Guidelines”, “Can. English Ratings” or “Can. French Ratings”) from the Parental CTRL to reactivate BLOCK. (See pages 44 and 47.)

Method 3:

Switch off the TV power.

NOTE

•Performing any of the three above will activate the V-CHIP BLOCK.

Digital Setup

This setting allows you to optimize the settings of Digital broadcasting.

Audio Setup

You can output digital audio to an AV amplifi er or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected.

1

Press MENU to display the MENU screen, and

then press c/d to select “Digital Setup”.

 

2

Press a/b to select “Audio Setup”, and then

press ENTER.

 

3

Press a/b to select “PCM” or “Dolby Digital”,

and then press ENTER.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PCM

 

 

 

 

 

 

 

 

 

 

 

 

 

Dolby Digital

 

 

 

 

 

 

 

 

 

Selected item

 

Description

 

 

 

 

PCM

 

 

The optical output terminal outputs audio

 

 

 

signal in PCM form. If your digital audio

 

 

 

system does not support Dolby Digital,

 

 

 

select “PCM”.

 

 

Dolby Digital

The optical output terminal outputs audio

 

 

 

signal in Dolby Digital form. It reproduces

 

 

 

sound from surround program of digital.

 

 

 

4

Press MENU to exit.

 

 

 

 

Identification

1

Press MENU to display the MENU screen, and

then press c/d to select “Digital Setup”.

 

2

Press a/b to select “Identifi cation”, and then

press ENTER.

 

 

The current version of the TV software is

 

displayed.

47