Other viewing options

Auto Power On

If this is activated, the One Touch Play function is enabled.

While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.

1

Press MENU to display the MENU screen, and

 

then press c/d to select “Option”.

 

 

2

Press a/b to select “AQUOS LINK Setup”,

 

and then press ENTER.

 

 

3

Press a/b to select “Auto Power On”, and

 

then press ENTER.

 

 

 

 

 

 

 

 

 

 

 

 

 

Auto Power On

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Selecting Recorder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Yes

 

 

No

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Press c/d to select “Yes”, and then press

 

ENTER.

5

Press MENU to exit.

Selecting Recorder

When multiple AQUOS LINK-compatible devices are connected, this function allows you to set the recorder for recording when you press REC on the TV’s remote control.

1

Press MENU to display the MENU screen, and

 

then press c/d to select “Option”.

 

 

2

Press a/b to select “AQUOS LINK Setup”,

 

and then press ENTER.

 

 

3

Press a/b to select “Selecting Recorder”,

 

and then press ENTER.

 

 

 

 

 

 

 

 

 

 

 

 

Auto Power On

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Selecting Recorder

 

 

 

 

 

 

 

 

 

 

Input

Location

 

 

 

 

 

 

 

 

 

 

 

 

 

INPUT4

[1.0.0.0]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INPUT5

[2.0.0.0]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 Press MENU to exit.

NOTE

Example : when connecting AQUOS LINK-compatible recorder via AQUOS LINK-compatible Audio system

Auto Power On

Selecting Recorder

InputLocation

INPUT4[1.0.0.0]

INPUT45WD [1.0.1.0]

INPUT5[2.0.0.0]

When an AQUOS LINK-compatible Audio system or other equipment is connected between the TV and recorder, “Sub” is displayed.

55