6

Supplied Accessories

Detaching the stand neck for wall mounting

QUICK REFERENCE

Attaching/Detaching the Stand

• Beforeattaching(ordetaching)thestand,unplugtheACcordfromtheACINPUTterminal.
• BeforeperformingworkspreadcushioningoverthebaseareatolaytheTVon.Thiswillpreventitfrombeingdamaged.
CAUTION
•Attach the stand in the correct direction.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
•Todetachthestand,performthestepsinreverseorder.
1Conrmthatthereare4screwssuppliedwiththestandunit.
21InsertthestandintotheopeningsonthebottomoftheTV.
2Insertandtightenthe4screwsintothe4holesonthebottomoftheTV.
1
2
1
•AlwaysusetheACcordsuppliedwiththeTV.
•ACcordenclosedinthisproductisfor110-125V.Inusingitonthe125-240VAC,pleaseconsultthefollowing.
SHARP ELECTRONICS CORPORATION, LATIN AMERICA GROUP
6100 Blue Lagoon Drive, Suite 150, Miami, Florida 33126, U.S.A.
Makesurethefollowingaccessoriesareprovidedwiththeproduct.
Remotecontrolunit
(g1)
Page7
“AA”sizebattery
(g2)
Page8
ACcord
(g1)
Page7
Stand
(g1)
Page6
Screws
(g4)
Page6
Operationmanual
(g1)
1
2
1
2
3
CAUTION
•Detach the stand neck in the correct direction.
•Do not remove the stand neck from the TV unless using an optional wall mount bracket to mount it.
11Loosenthe4screwsthatsecurethestandneck
byusingacross-headscrewdriver.
2RemovestandneckfromtheTVset.
2 Loosenthe4screwsandpullouthingeplate.
31PlacethehingeplateintheTVsetasillustration
shown.
2PlacethestandcoverintheTVsetandtighten
the4screwsintothe4holes.
•Toattachthestandneck,performthestepsinreverse
order.