55

Using external equipment

Connecting HDMI equipment

Please use the INPUT 4 terminal when connecting HDMI equipment.

HDMI cable

(Commercially available)

Displaying an image from HDMI equipment

To watch an HDMI equipment image, select

“INPUT4” from “INPUT SOURCE” menu

using INPUT on the remote control unit or

on the Display. (See page 67.)

INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4

INPUT5INPUT5

CARD
i.LINK
1
Press MENU and the MENU screen displays.
2
3

Press a/b to select “HDMI Setup”, and then

press ENTER.
4

Press c/d to select “Option”.

MENU [Option ... HDMI Setup]
Option
3D Noise Reduction
Mosquito Noise Reduction
HDMI Setup
[Off]
[Low]
5

Press a/b to select the desired item and

press ENTER.

Press a/b/c/d to select the desired setting

and press ENTER.

6
NOTE

• Refer to your external equipment operation manual for

the signal type.

Selectable items
Auto/RGB/YCbCr
4:4:4/YCbCr 4:2:2
Auto/ITU601/
ITU709
Standard/
Out of standard
Enable/Disable
HDMI Setup
items
Signal
Type
Color
Matrix
Dynamic
Range
Auto View
Description
Select the signal type from
an HDMI terminal. Unless
the image quality looks
obviously poor, select Auto.
Select the internal color
space conversion method
when an RGB signal is
input. Normally, select
Auto.
Select the signal amplitude
range. Normally, select
Standard.
Set whether or not to use
VIEW MODE based on
signal recognition,
including an HDMI signal.
LC-45GD6U(E)-051-056 04.9.24, 7:45 AM55