Supplied accessories

Make sure the following accessories are provided with the product.

Remote control unit (g1)

AC cord

Cable Clamp (g2)

Stand unit

Operation manual

“AAA” size battery (g2)

(g1)

Cable tie (g1)

(g1)

(g1)

Page 8

Page 7

Page 7

Page 6

 

NOTE

•Always use the AC cord supplied with the TV.

•AC cord enclosed in this product is for 110-125V. In using it on the 125-240V AC, please consult to the following.

SHARP ELECTRONICS CORPORATION

6100 Blue Lagoon Drive, Suite 230, Miami, Florida 33126, U.S.A.

QUICK REFERENCE

Attaching the stand

•Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.

•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

CAUTION

•Attach the stand in the correct direction.

•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

1Confi rm that there are 10 screws (6 short screws and 4 long screws) supplied with the stand unit.

Attach the two supporting posts for the stand

2unit onto the base using the box for the stand unit as shown below.

(Close-up of the upper side of the stand unit)

3

1 Insert the stand into the openings on the

bottom of the TV.

 

2 Insert and tighten the 4 long screws into

 

the 4 holes on the rear of the TV.

 

 

Hex key

 

2

Long screw 2

 

 

Soft cushion

23

Hex key

 

1

 

 

 

3 2

 

 

1

 

1

 

NOTE

 

 

• To

.

Short screw

 

 

1Insert each of the protrusions on the two supporting posts into the openings on the upper side of the base.

2Insert and tighten the 6 short screws with the hex key (supplied with the product) in the order of 1,

6 2 and 3.