Useful adjustment settings

Auto Sync. adjustment (for Analog PC input mode only)

For automatically adjusting the PC image.

Press

to display the MENU screen,

1and then press c/d to select “Setup”.MENU

Press a/b to select “Auto Sync.”, and then

2press ENTER.

Press c/d to select “Yes”, and then press

3ENTER.

•Auto Sync. starts and “Now adjusting the image.” displays.

 

 

 

 

 

 

Yes

 

No

 

 

 

 

 

 

30%

4Press MENU to exit.

NOTE

•When Auto Sync. is successful, “Completed” displays. If not, Auto Sync. failed.

•Auto Sync. may fail even if “Completed” displays.

•Auto Sync. may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing Auto Sync.

•Be sure to connect the PC to the TV and switch it on before starting Auto Sync.

•It is not necessary to use “Auto Sync.” when digital signal is being input, so it cannot be selected.

Fine Sync. adjustment (for DVI input mode only)

Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image.

Press

to display the MENU screen,

1and then press c/d to select “Setup”.MENU

Press a/b to select “Fine Sync.”, and then

2press ENTER.

Press a/b to select the specifi c adjustment

3item.

 

 

 

 

 

 

 

 

 

H-Pos.

[ 90]

a

 

 

b

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V-Pos.

[ 39]

a

 

 

b

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clock

[ 90]

a

 

 

b

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Phase

[ 20]

a

 

 

b

 

 

 

 

 

 

 

 

 

 

Reset

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Selected item

Description

 

 

H-Pos.

Centers the image by moving it to the

 

left or right.

 

 

V-Pos.

Centers the image by moving it up or

 

down.

 

 

Clock

Adjust when the image fl ickers with

 

vertical stripes.

 

 

Phase

Adjust when characters have low

 

contrast or when the image fl ickers.

 

 

Press c/d to adjust the item to your desired

4position.

5Press MENU to exit.

NOTE

•For resetting all Fine Sync. adjustment items to the factory preset values, press a/b to select “Reset”, and then press ENTER.

•It is not necessary to adjust the “Clock” or “Phase” when a digital signal is being input, so it cannot be selected.

34