Supplied accessories
Make sure the following accessories are provided with the product.
Remote control unit (g1) | AC cord | Cable Clamp (g2) |
“AAA” size battery (g2) | (g1) | Cable tie (g1) |
Page 9 | Page 8 | Page 8 |
■ Operation manual (g1) |
|
|
Stand hole cover | Stand unit | Speaker unit (g1) |
(g2) | (g1) | Screwdriver (g1) |
Page 6 | Page 7 | Screw (g4) |
|
| Page 6 |
NOTE
•Always use the AC cord supplied with the TV.
•AC cord enclosed in this product is for
SHARP ELECTRONICS CORPORATION
6100 Blue Lagoon Drive, Suite 230, Miami, Florida 33126, U.S.A.
QUICK REFERENCE
Attaching the speaker unit
•Before attaching (or detaching) the speaker unit, unplug the AC cord from the AC INPUT terminal.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
Confi rm that there are 4 screws and a
1screwdriver supplied with the speaker unit.
Insert the projections on the speaker unit
2into the corresponding slots on the TV, then fasten the screws.
Screwdriver
Screw
Soft cushion
3
Connect the ends of the cables to the
of
Black Red
Red
Black
NOTE
•To detach the speaker unit, perform the steps in reverse order.
Insert and tighten the 4 screws with the hex key (supplied with the product) in the order of 1, 2, 3 and 4.
6