Appendix

Removing the stand

Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.

CAUTION

• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

Before attaching/detaching stand

• Before performing work make sure to turn off the TV.

1

Unfasten the four screws used to secure the stand in place.

2

Detach the stand from the TV.

(When moving the TV, be sure to always hold the grips on the back. )

NOTE

• To attach the stand, perform the above steps in reverse order.

Setting the TV on the wall

CAUTION

•This TV should be mounted on the wall only with the AN-65AG1 (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

•Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

•You can ask a qualifi ed service professional about using an optional AN-65AG1 bracket to mount the TV to the wall.

•Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall

About setting the TV angle and height adjustment

AN-65AG1 wall mount bracket.

 

(See the bracket instructions for details.)

0°/5°/10°

 

Vertical mounting

Angular mounting

NOTE

• Detach the cable clamps on the rear of the TV when using the optional mount bracket.

52