Sharp MX-2600N, MX-3100N manual 388

FACSIMILE

SPECIFYING THE SCAN SIZE AND SEND SIZE (Enlarge/Reduce)

When the original is placed, its size is automatically detected and displayed in the base screen.

The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.

Scan	Internet Fax			Fax		USB Mem. Scan			PC Scan
Address Book
		Original	Scan:		Auto		8½x11	Send:		Auto
Direct TX		Exposure		Auto
Sub Address
		Resolution	Standard
Address Review		Special Modes
File
Quick File

Auto Reception

Fax Memory:100%

In the above screen, the scan size (the placed original) is 8-1/2" x 11" (A4) and the send size is auto. If, for example, the scan size were 8-1/2" x 11" (A4) and the send size were 5-1/2" x 8-1/2" (B5), the image would be reduced before transmission.

"Scan Size"

	"Send Size" is set to	Transmission
	5-1/2" x 8-1/2" (B5)
		The image is reduced
8-1/2" x 11" (A4)
		to 5-1/2" x 8-1/2" (B5)
		before transmission

• Only standard original sizes can be automatically detected. ☞ STANDARD SIZES (page 4-28)

•When the original size is a non-standard size, or if the size is not detected correctly, manually specify the original scan size.

☞Specifying the original scan size (by paper size) (page 4-48)

☞Specifying the original scan size (by numerical values) (page 4-50)

4-47

Contents