17
BEFORE USING THE MACHINE
1
Special papers
Follow these guidelines when using special papers.
Envelopes
Do not use the following envelopes (Misfeeds will
occur.).
• Enve lopes with metal tabs, clasps, strings, holes, or
windows.
• Envelopes with rough fibers, carbon paper, or glossy
surfaces.
• Envelo pes with two or more flaps.
• Enve lopes with tape, film, or paper attached to the
flap.
• Envelo pes with a fold in the flap.
• Enve lopes with glue on the flap to be moistened for
sealing.
• Enve lopes with labels or stamps.
• Enve lopes that are slightly inflated with air.
• Enve lopes with glue protruding from the seal area.
• Envelo pes with part of the seal area peeled off.
Letterhead paper
Letterhead paper is paper with information pre-printed
at the top such as a company name and address.
• Use S HARP recommended transparency film and
label sheets. Using other than SHARP
recommended paper may result in misfeeds or
smudges on the output. If other than SHARP
recommended media must be used, feed each sheet
one at a time using the bypass tray (Do not attempt
continuous copying or printing.).
• There are many varieties of special paper available
on the market, and some cannot be used with this
machine. Before using special paper, contact your
authorised service representative.
• Before using other than SHARP recommended
paper, make a test copy to see if the paper is
suitable.
SHARP