7-35
SYSTEM SETTINGS
Contents
*1 When an automatic document feeder is installed.
*2 When a saddle stitch finisher is installed.
*3 When a finisher (large stacker) is installed.
*4 When a large capacity tray is installed.
*5 When a stand/1 x 500 sheet paper drawer / stand/2 x 500 sheet paper drawer is installed.
*6 When a saddle stitch finisher or finisher is installed.
*7 When a punch module is installed.
Copy Function Settings
XDisabling of Finisher*6Disabled 7-70
XDisabling of Offset Disabled 7-70
XDisabling of Stapler*6Disabled 7-70
XDisabling of Punch*7Disabled 7-70
●Fusing Control Settings 60 - 89g/m2 (16 - 23 lbs.) 7-70
Item Factory default setting Page
■Copy Function Settings 7-71
●Initial Status Settings
7-71
XPaper Tray Varies depending on the machine
configuration
XExposure Type Auto
XCopy Ratio 100%
X2-Sided Copy 1-Side to 1-Side
XOutput –
●Other Settings 7-72
XCopy Exposure Adjustment 57-72
XRotation Copy Setting Enabled 7-72
XAdd or Change Extra Preset Ratios –7-72
XSetting a Maximum Number of Copies 999 7-72
XInitial Margin Shift Setting
7-72Side 1 10mm (1/2")
Side 2 10 mm (1/2")
XErase Width Adjustment
7-72Edge Clearance Width 10mm (1/2")
Centre Clearance Width 10mm (1/2")
XCard Shot Settings
7-72Original Size X: 86mm (3-3/8"), Y: 54 mm (2-1/8")
Fit to Page Disabled
XAutomatic Saddle Stitch*Enabled 7-72
XInitial Tab Copy Setting 10mm (1/2") 7-72
Item Factory default setting Page