1-55
BEFORE USING THE MACHINE
Contents
Disposal of hole punch scrap (when the punch module is installed)
5
Return the saddle stitch holder and the
saddle stitch unit to their respective
original positions.
6
Make sure that the finisher is firmly attached to the machine and that A3, A4R, or
B4 (11" x 17", 8-1/2" x 11"R, or 8-1/2" x 14") size paper is loaded.
If one of the above paper sizes is not set, test stapling cannot be performed.
7
Close the lower cover of the finisher.
Test stapling is automatically performed on a blank sheet.
This operation is carried out to avoid blank stapling.
If test stapling fails to take place, repeat steps 1 to 7.
1
Open the front cover of the finisher.
2
Holding the black handle, slide out the
case containing the paper bits, and
dispose of them properly.
3Return the waste case to its original position.
4Close the front cover of the finifher.