Manuals / Brands / Computer Equipment / Projector / Sharp / Computer Equipment / Projector

Sharp 5Setting the Video System, 6Setting the Video Setup, 7Checking the Input Signal

Models: PG-LW3000 PG-LW3500 PG-LX3000 PG-LX3500 PGLX3500

1 77

Download 77 pages, 8.29 Mb

Signal Adjustment (“SIG-ADJ” Menu) (Continued)

Menu operation n Page 40

5Setting the Video System

The video input system mode is factory preset to “Auto”; however, a clear picture from the connected audio-visual equipment may not be received, depending on the Video signal difference.

In that case, switch the Video signal.

Selectable items

Auto

PAL

SECAM

*NTSC4.43

NTSC3.58

PAL-M

PAL-N

PAL-60

*When reproducing NTSC signals in PAL video equipment.

Note

•The Video signal can only be set in VIDEO mode.

•When “Video System” is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal.

6Setting the Video Setup

Selectable	Description
items	Description
items

0 IRE	Sets the black level to 0 IRE.
7.5 IRE	Sets the black level to 7.5	IRE.

Note

•This function is available for the following signals.

With COMPUTER/COMPONENT input: - 480I

With VIDEO input: - NTSC3.58

7Checking the Input Signal

This function allows you to check the current input signal information.

46

Contents

MODEL Model No.: Serial No.: ENGLISH INFORMATION PRODUCT DISPOSAL Caution Concerning Lamp Replacement Caution Supplied accessories Preparing Introduction Easy Start Setup Connections Reference CAUTION: Page Observe the following safeguards when setting up your projector Info Page Page Page Inserting the Batteries Caution Usable Range Setup and Projection 1. Place the projector facing a wall or a screen 3. Turn the projector on 6. Select the Input mode 5. Correct trapezoidal distortion 4. Adjust the projected image with the Setup Guide 7.Turn the computer on 8.Turn the power off Video Setup Setting Up the Projector Standard Setup (Front Projection) Indication of the Projection Image Size and Projection Distance [PG-LW3000/PG-LW3500] Screen Size and Projection Distance Screen Size and Projection Distance (Continued) Projection (PRJ) Mode aCeiling-MountSetup Terminals on the Projector Connecting the Projector to Other Equipment (Continued) Page Page Page Turning the Projector On Turning the Power Off (Putting the Projector into Standby Mode) Basic Operation About the Setup Guide Adjusting the Projected Image 1 Adjusting the Focus 2 Adjusting the Height 3 Adjusting the Picture Size Correcting Trapezoidal Distortion Switching the Input Mode Adjusting the Volume Displaying the Black Screen and Turning Off the Sound Temporarily Resize Mode About Copyrights Page Page Displaying the Pointer Displaying and Setting the Break Timer Using the Spot Function Switching the Eco+Quiet Mode Auto Sync (Auto Sync Adjustment) Freezing a Moving Image Selecting the Picture Mode Displaying an Enlarged Portion of an Image Page Page Page Menu Selections (Quick Start Menu) Quick Start Menu To adjust the projected image while watching it 1Selecting the Picture Mode 2Adjusting the Image 3Adjusting the Color Temperature 4Adjusting the Colors 5Selecting the Film Mode 7Eco+Quiet 6Reducing Image Noise (DNR) 2Resolution Setting 3Signal Type Setting 5Setting the Video System 6Setting the Video Setup 7Checking the Input Signal 1Setting the Resize Mode 3Keystone Correction 2Adjusting the Image Position 4Setting the Overscan 5Setting the On-screenDisplay 6Closed Caption 7Selecting the Background Image 8Selecting the Setup Guide 9Reversing/Inverting Projected Images 0Selecting the Wall Color 1Auto Sync (Auto Sync Adjustment) 2Auto Power Off Function 3Auto Restart Function 4Speaker Setting 5Fan Mode Setting 6 System Lock Function 7Keylock Function 8Selecting the Quick Start Menu 9COMPUTER2 Select 0Setting the FUNCTION Button Operation STANDBY Mode STANDBY Audio Out DLP® LinkTM DLP® LinkTM Invert Setting Up the Projector Network Environment (“Network” Menu) 1 Setting a Password 2DHCP Client Setting 3TCP/IP Setting 4Returning to Default Settings (Network) 5Restart Network Function 6Confirming the Projector Information Precautions on Viewing Stereoscopic 3D Images WARNING Information on the 3D Projection Function Using 3D Viewing Mode Warning Projecting 3D images Ending 3D projection Page Page Page Lamp Caution Concerning the Lamp Replacing the Lamp Removing and Installing the Lamp Unit Resetting the Lamp Timer Page Page Page Page Page Page Page Units: inches (mm)