56
Saving Projected Images
•This projector allows you to capture projected images (RGB signals) and set them as a
startup image, or background image when no signals are being received.
•You can capture the images that are input using analog RGB signals and Digital DVI XGA
signals.
Capturing the Image
Select “Image Capture” in the “Options
(1)” menu ➝ For details, see page 38.
1Press or to select
“ Save Image” and press .
•The projected image is captured. It
may take some time for capturing.
211
11
1Press or to select
“Yes”.
22
22
2Press .
Note
•This function only works in 1024 x 768
(XGA) with the exception of 43 Hz vertical
which is a interlaced signal.
•The saved image is reduced to 256 col-
ors.
•Images from equipment connected to IN-
PUT 2 or INPUT 3 cannot be captured.
Deleting the Captured
Image
1Select “ Delete” and press
.
211
11
1Press or to select
“OK”.
22
22
2Press .
-56