Sharp PN-R603, PNR603 Turning Power On/Off

16

E

Caution

• Turn on the monitor rst before turning on the PC or

playback device.

Turning on the main power

Main power switch

Caution

• The main power must be turned on/off with the main power

switch. Do not connect/disconnect the power cord or turn

the breaker on/off while the main power switch is on.

• When switching the main power switch or the POWER

button off and back on, always wait for at least 5 seconds.

• For a complete electrical disconnection, pull out the main

plug.

Turning Power On/Off

Turning power on/off

Press the POWER button or POWER switch to turn the power

ON/OFF.

Power switch Power LED

Status Status of the monitor

Green lit Power on

Orange lit Power off (Standby mode)

Green ashing Input signal waiting mode

It is possible to check the power LED even when the operation

panel is stored inside the monitor.

Power LED

Caution

• When switching the main power switch or the POWER

button off and back on, always wait for at least 5 seconds.

A short interval may result in a malfunction.

TIPS

• When the main power switch is off, the monitor cannot be

turned on.

• If the monitor is in the input signal standby mode and you

press the POWER button on the remote control unit, the

monitor enters standby mode.

• Setting the SCHEDULE ashes the power LED alternately

in red and orange in standby mode.

• To disable the logo screen from displaying when turning the

power ON, set LOGO SCREEN to OFF on the OTHERS

menu. (See page 28.)

Contents

Main Page IMPORTANT INFORMATION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION WARNING: NOTE: SAFETY PRECAUTIONS DEAR SHARP CUSTOMER SAFETY PRECAUTIONS (Continued) WARNING: Especially for child safety TIPS AND SAFETY INSTRUCTIONS The Power Cord Manual Scope LED Backlight MOUNTING PRECAUTIONS Supplied Components Contents nFront view Part Names nRear view Part Names nRemote control unit Connecting Peripheral Equipment Input mode Audio input terminal (Factory setting) Connection with a PC or AV equipment Connecting Peripheral Equipment Connecting the Power Cord Binding Cables Preparing the Remote Control Unit Installing the batteries Remote control operation range Operation panel in Operation panel out Turning Power On/Off Turning power on/off Turning Power On/Off nDate/time setting Disabling power on/off operations Basic Operation Basic Operation nSwitching the screen size Menu Items Displaying the menu screen nExample of operation nMenu screen display Menu item details nSCREEN n PICTURE Page nAUDIO nSETUP Page nMONITOR nMULTI/PIP nOTHERS nDual screen display nEnlarge nZOOM2 SPECIAL SETTING nSCHEDULE Adjustments for PC screen display nAutomatic adjustment nScreen display for adjustment Initialization (Reset)/Functional Restriction Setting (FUNCTION) Controlling the Monitor with a PC (RS-232C) PC connection nOne-to-one connection with a PC nDaisy chain connectionAdvanced operation Communication conditions Page nCommands for ID control nRepeater control nRepeater control command Setting of the GAMMA user data nTo transfer the GAMMA user data nSaving the GAMMA user data nActivating the GAMMA user data nChecking the GAMMA user data RS-232C command table Power control/Input mode selection SCREEN menu PICTURE menu AUDIO menu SETUP menu MONITOR menu MULTI/PIP menu IMAGE POSITION (EPOS) setting In landscape orientation 2 x 2 3 x 3 4 x 4 5 x 5 In portrait orientation 2 x 2 3 x 3 4 x 4 5 x 5 OTHERS menu Initialization/Functional Restriction Setting (FUNCTION) menu Others Commands for setting of the GAMMA user data Initializing personal information Controlling the Monitor with a PC (LAN) Settings to connect to a LAN To set on the monitor To set from a PC Set up process (1) Connecting your monitor to a PC (2) Specifying the PCs IP address (3) Conguring the monitors LAN settings Controlling with a PC Basic operation INFORMATION CONTROL ADJUSTMENT NETWORK (LAN SETUP) NETWORK (SECURITY) NETWORK (GENERAL) MAIL (ORIGINATOR) MAIL (RECIPIENT) MAIL (PERIODICAL) SNMP SERVICE & SUPPORT (URL INFORMATION) [Advanced operation] Command-based control (1) Connect the PC to the monitor. (2) Send commands to control the monitor. (3) Disconnect the connection with the monitor and quit the function. Troubleshooting Troubleshooting Specications nProduct Specications Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 ], DisplayPort 1.1 nDimensional Drawings nPower management nDDC (plug and play) nCompatible signal timing (PC) nCompatible signal timing (AV) nDVI-I input terminal pins (DVI-I 29 pin) nPC/AV D-sub input terminal pins (Mini D-sub 15 pin) nDisplayPort input terminal pins nDVI-D output terminal pins (DVI-D 24 pin) nDisplayPort output terminal pins (DisplayPort 20 pin) nRS-232C output terminal pins Mounting Precautions (For SHARP dealers and service engineers)