E24
Function
Command Direction
Parameter Reply Control/Response contents *1 *2
(A) (B)
OSD H-POSITION OSDH WR 0-100 0-100 ○
○ ○
OSD V-POSITION OSDV WR 0-100 0-100
MONITOR STDR WR 0-1 0-1 0: LANDSCAPE, 1: PORTRAIT ○
MONAURAL AUDIO MONO WR 0-1 0-1 0: OFF, 1: ON ○
LANGUAGE LANG WR 14 14 ENGLISH
○
1 1 DEUTSCH
2 2 FRANÇAIS
3 3 ITALIANO
4 4 ESPAÑOL
5 5 РУССКИЙ
6 6
POWER ON DELAY PWOD WR 0 0 OFF ○
1-60 1-60 ON
STANDBY MODE STBM WR 0-1 0-1 0: STANDARD, 1: LOW POWER
(“ERR" when SCHEDULE is effective or OFF is selected for LED.) ○
HDMI SETTING HDMI AUTO VIEW HDAW WR 0-1 0-1 0: OFF, 1: ON
○
HDMI RGB INPUT
RANGE
HDRA WR 0-2 0-2 0: AUTO, 1: FULL, 2: LIMITED
HOT PLUG CONTROL (DVI) HPCT WR 0-1 0-1 0: OFF, 1: ON ○-○
HOT PLUG CONTROL (HDMI) HPCH WR 0-1 0-1 0: OFF, 1: ON ○ ○ ○
RS-232C/LAN SELECT CTLS WR 0-1 0-1 0 : RS-232C 1 : LAN ○-○
ID NUMBER ID NO. SETTING IDST W 0-255 Sets the monitor’s ID number. (“0” means “no ID number”.)
○ ○ ○
R 0-255 Returns the monitor’s ID number.
ID NO. SETTING
(ONCE)
IDSL W 1-255 Sets a monitor ID number.
This ID number is only effective for the command immediately after this
command.
0 Clears the ID number if one has been designated.
ID NO. SETTING
(SUBSEQUENT)
IDLK W 1-255 Sets a monitor ID number.
This ID number is effective for the next and all subsequent commands
after this command.
0 Clears the ID number if one has been designated.
ID CHECK IDCK W 0 ID : xxx
IDLK : yyy
Displays monitor’s own ID number and the selected ID number on the
screen.
BAUD RATE BAUD WR 0-2 0-2 0: 9600bps, 1: 19200bps, 2: 38400bps ○ ○ ○
SPEAKER SELECT SPSL WR 0-1 0-1 0: Internal speaker, 1: External speaker ○-○
OPTION DC OUT SETTING DCOT WR 0-2 0-2 0: OFF, 1: MODE1, 2: MODE2 -○ ○
Controlling the Monitor with a PC (RS-232C)