Video Connections

Connecting to the Component Jacks

You can enjoy accurate colour reproduction and high quality images through the component jacks.
Y
PB
(CB)
PR
(CR)
COMPO-
NENT IN
This Player
Video equipment with component jacks
NOTE
Connect the Blu-ray disc player to LCD TV directly.
If you play back the image via VCR, the image may
deteriorate due to the copy guard function.
When you record the programme where copyright
is protected, the copy guard function is activated
automatically; the programme cannot be recorded
correctly. Also, the playback image via VCR may
deteriorate due to this function. However, this is not a
malfunction. When you watch the programme where
copyright is protected, we recommend that the Blu-ray
disc player be connected to LCD TV directly.
CAUTION
You need to select the priority video output in
“Settings” – “Audio Video Settings” – “Video Out
Select”. (See page 38.)
When the priority video output is set to “HDMI” in
“Video Out Select”, the video resolution which is output
from the COMPONENT VIDEO OUT jacks is the one
set in “HDMI Video Out”.
When the output from the COMPONENT VIDEO OUT
jacks is prioritised, set the priority video output to
“Component”.
16
TVProjector AV receiver
To COMPONENT
VIDEO OUT jacks
VCR
Blu-ray Disc
Player
LCD TV
Connect directly
(Red)
(Blue)
(Green)
(Red)
(Blue)
(Green)
Component video cable
(commercially available)
1
2To COMPONENT
IN jacks
STEPS
Be sure to turn off this Player and the equipment before making any connections.
Firmly connect a component video cable (commercially available) to the component jacks (1 and 2).
1
2
After connecting
Connect audio equipment or the audio terminals of the TV. (Pages 18–19)
Red
Blue
Green
Red
Blue
Green
Video signal outputs:
1080i 50/60Hz 576i 50Hz
720p 50/60Hz 480p 60Hz
576p 50Hz 480i 60Hz
For example;
480p: 480 progressive scan
480i: 480 interlace scan