Introduction
-19
Using the Remote Control as a Wireless Computer Mouse
When connecting the supplied remote
mouse receiver to the computer, you can use
the remote control as the wireless computer
mouse.
1Connect the supplied remote
mouse receiver to the USB termi-
nal on the computer.
2Slide the ADJ./MOUSE
switch on the remote con-
trol to the MOUSE position.
3Use the mouse function.
•Point the remote control at the remote
mouse receiver.
■When moving the cursor
Press '/"/\/|.
■When left-clicking
Press .
■When right-clicking
Press .
■When your computer supports only a
one-click mouse (such as Macintosh®)
Press or . ( and have com-
mon function.)
ADJ.
MOUSE
Remote mouse
receiver
Supplied
accessory
Note
•This function only works with the Microsoft®
Windows® OS and Mac OS®. However, this
function does not work with the following op-
eration systems that do not support USB.
•Versions earlier than Windows® 95.
•Versions earlier than Windows® NT4.0.
•Versions earlier than Mac OS® 8.5.
•Confirm that the computer recognizes the USB
connection.
•While the remote control is connected to the
projector with a signal cable, you cannot use
the wireless computer mouse function.
Computer
To USB terminal
Remote mouse receiver
Mouse/adjustment button ('/"/\/|)
ADJ./MOUSE switch
R-click button
L-click button