Cleaning the Ventilative Holes
•This projector is equipped with ventilative holes to ensure the opti- mal operating condition of the projec- tor.
•Periodically clean the ventilative hole by vacuuming it off with a vacuum cleaner.
•The ventilative holes should be cleaned every 100 hours of use. Clean the ventilative holes more often when the projector is used in a dirty or smoky location.
Cleaning theVentilative Holes1 Press 
on the projector or
on the remote control to put the projector into the standby mode.
•Wait until the cooling fan stops.
2 Disconnect the Power Cord.
Side and Rear view | Bottom view |
Ventilative holes 
Ventilative |
| |
holes | Ventilative | |
Ventilative holes | ||
holes | ||
STANDBY |
| |
button |
| |
| STANDBY | |
| button |
3 Clean the dust off by putting the cleaner hose on the intake ventilative holes.
Cleaner hose
Cleaner hose
Appendix
-77