31
CHANGING THE VIDEO SIGNAL FORMAT
Depending on the countries, this unit conforms to either the NTSC color system for U.S.A, Canada, etc., or the PAL for
Europe, Australia, China, etc.
If the color system of this unit is different from that of your TV monitor and the discs to be played, the screen may be
somewhat hard to see or the picture quality may be poor.
Only in this case, change the video signal format to another.
(For details about the video signal format of your TV monitor or the discs, refer to the operating instruction of your TV or the
discs jacket.)
You can set the video signal format to the desired at initial settings, too.
(For details, refer to When selecting the TV SYSTEM on page 35.)
In the stop mode, press the NTSC/PAL button.
Each time this button is pressed, the video signal format
changes as follows:
󳂵NTSC 󳂵PAL
RC