33
SETTING THE VIDEO SETUP
Then the setting menu of the selected item is displayed.
1
Press the CURSOR /buttons to select the preferred item.
RC

󳂮When selecting the HDMI OUTPUT

Notes:

When the HDMI OUTPUTis set to ON, the interlacing video signals will be output from the COMPONENT VIDEO OUTPUT 1

and 2 jacks regardless of the SCAN TYPE setting.

Only when the HDMI OUTPUT is set to ON, you can set the HDMI FORMAT and VIDEO OUTPUT to your preference.

Only when the HDMI OUTPUT is set to OFF, you can set the SCAN TYPE and PROGRESSIVE mode to your preference.

󳂮When selecting the HDMI FORMAT

You can select the format of video signals to be output from the HDMI OUTPUT connector depending on the TV connected to

this unit.(For details, refer to the operating instructions of TV.)

Notes:

When the HDMI OUTPUT connector is connected to the DVI INPUT connector of the TV, etc., if the HDMI FORMAT is set to

YCBCR, no picture may be shown. Should this happen, set it to RGB NORMAL or RGB ENHANCED.

When the HDMI FORMAT is set to RGB NORMAL, if the black may seem to stand out depending on the connected TV, set it

to RGB ENHANCED.

Item menu
HDMI OUTPUT : When outputting signals from the HDMI OUTPUT connector
or not.
HDMI FORMAT : When outputting either the component or the RGB video
signals from the HDMI OUTPUT connector.
VIDEO OUTPUT : When outputting the video signals in the desired resolution
from the HDMI OUTPUT connector.
SCAN TYPE : When outputting either the conventional interlacing video signals
or the progressively scanned video signals from
the COMPONENT VIDEO OUTPUTs.
PROGRESSIVE SCAN MODE : When selecting the method of progressive
conversion according to the type of content
being played back.
TV DISPLAY : When selecting a picture size according to the aspect ratio of
your TV's screen
TV SYSTEM : When selecting the desired video signal format to match that of
your TV monitor and DVD to be played.
SCART VIDEO : When selecting the desired video signal(s) to be output from
the unit's A/V SCART OUTPUT connector.
(Regional option for Europe, etc. only)
BLACK LEVEL : When adjusting the intensity of black.
Setting menu
VIDEO SETUP
HDMI OUTPUT
HDMI FORMAT
VIDEO OUTPUT
SCAN TYPE
P-SCAN MODE
TV DISPLAY
TV SYSTEM
SCART VIDEO
OFF
ON
BLACK LEVEL NORMAL
DARKER
OFF : When outputting no signals from the HDMI OUTPUT connector.
ON : When outputting the signals from the HDMI OUTPUT connector.
HDMI OUTPUT
HDMI FORMAT
VIDEO SETUP
OFF
ON
YCBCR : When outputting the component (YCBCR) video signals from
the HDMI OUTPUT connector.
RGB NORMAL : When outputting the RGB video signals with a digital
RGB video level(data range) of 16(black) to 235(white).
RGB ENHANCED : When outputting the RGB video signals with a digital
RGB video level(data range) of 0(black) to 246(white).
HDMI OUTPUT
HDMI FORMAT
VIDEO OUTPUT
SCAN TYPE
YCBCR
RGB NORMAL
RGB ENHANCED
VIDEO SETUP