The Properly Equipped Operator

Always wear appropriate hearing protection.

Wear nonslip heavy-duty work gloves to improve your grip on the handle. Wear snug-fitting clothes that also permit freedom of movement. NEVER wear shorts!

Keep a proper footing and do not overreach—maintain your balance at all times during operation.

Wear sturdy footwear with nonslip soles to provide good footing. Steel- toed safety boots are recommended. Never operate unit bare-footed!

Always wear eye and hearing protection. Shindaiwa recommends wearing a face shield as additional face and eye protection.

Always operate with both hands firmly gripping the unit.

Keep bystanders at least 15 meters away from the unit while operating to reduce the risk of being struck by thrown debris.

Operating Precautions

WARNING!

Use Good Judgement

■■This Shindaiwa Cultivator Tool is specifically designed for use on the Shindaiwa Multipurpose Tool Carrier. Installation and/or use on any other model, brand or type of power tool is not approved by Shindaiwa. Attempts to use on non-approved models can damage the equipment and cause ac- cidents, serious injury or death.

■■Cultivator tines belts may move when starting engine. Place the multipurpose tool on a smooth level surface when starting.

■■Always make sure the cultivator attachment is properly installed and firmly tightened before operation.

■■Make sure there are no missing or loose fasteners, and that the ignition switch and throttle controls are working properly.

■■Do not operate the unit with the muffler removed.

■■Operate this unit only in a well ventilated area. Be aware of carbon monoxide poisoning. Exhaust gases and lubrication oil mist can cause serious injury or death.

■■Always hold the machine firmly with both hands when tilling, and maintain control at all times.

■■Always stop the engine immediately and check for damage if you strike a foreign object or if the unit becomes tangled. Do not operate with broken or damaged equipment.

■■Stop the unit immediately if it suddenly begins to vibrate or shake. Inspect for broken, missing or improperly installed parts or attachments.

■■Never transport the unit nor set it down with the engine running. An engine that’s running could be accidentally accelerated causing the tine assemblies to rotate.

■■Always clear your work area of trash or hidden debris that could be thrown back at you or toward a bystander.

■■Always keep the handles clean.

■■Always disconnect the spark plug wire before performing any maintenance work.

■■Always wear eye protection to shield against thrown objects.

■■Always protect yourself from hazards such as thorny brush and flying debris by wearing gloves and close fitting clothing that covers arms and legs. Never wear shorts. Don’t wear loose clothing or items such as jewelry that could get caught in machinery or underbrush. Secure long hair so it is above shoulder level.

CAUTION!

■■Always maintain this unit according to this owner’s manual and follow the recommended scheduled maintenance.

■■Never modify or disable any of the unit’s safety devices.

■■Always use genuine Shindaiwa parts and accessories when repairing or maintaining this unit.

■■Do not make unauthorized modifications to this unit.

■■Never allow the engine to run at high RPM without a load. Doing so could damage the engine.

■■When transporting the unit in a vehicle, tie it down securely to prevent damage and fuel spillage.

■■Always clear your work area of trash or hidden debris to help ensure good footing.

■■Keep the unit as clean as possible. Keep it free of loose vegetation, mud, etc.

4