Divert45
You can set the conditions for which calls are diverted to your mailbox or other numbers.
§Menu§ ( Divert
Set divert:
The most common condition for forwarding is:
Unanswered
§Menu§ ( Divert
NSelect Unanswered.
§Select§ Press.
Set Select.
JEnter the phone number to which a call will be di- verted (if not done already)
or
@select the phone number from the Phonebook or from the §Mailbox§. Confirm with:
§OK§ After a short pause, the setting is confirmed by the network.
Unanswered
This setting covers the most important conditions (see also below):
Not reachable, No reply, Busy
All calls
All callsoare diverted.
Symbol in the top line on the display in standby mode.
Spec. divert
Not reachable
Divert if the phone is switched off or out of range.
No reply
A call is only diverted after a short delay (depends on the network). The period can be set by the user to a maximum of 30 seconds in 5 second intervals.
Busy
Divert if a call is in progress.
Exception: If Call waiting is activated (p. 60), you will hear the call waiting tone (p. 14) during a call.