Siemens A75 Switch on/off, PIN entry, Security, Charging the battery, Switch on/off, Enter PIN, Standby mode, Clear SIM card barring, Prevent accidental activation

Switch on/off, PIN entry 3

Charging the battery

The battery is not supplied fully charged. Plug the charger cable into the bottom of the phone, plug the power supply unit into a mains power socket and charge for at least two hours.

Charging time

The charging time is 2 hours. Ambient temperature of 5 °C to 40 °C (icon flashes as a warning when 5 °C above/below this).

Switch on/off, PIN entry

Switch on/off

Press and hold On/Off/End keyBto switch on or off.

Enter PIN

The SIM card can be protected with a

4 - 8 digit PIN. Enter the PIN code using the number keys (the display shows a series of asterisks, if you make a mistake press §Clear§). Confirm your input with §OK§. Logging on to the network will take a few seconds.

First time switching on phone, the time and date must be set.

Standby mode

When the name of the service provider/ logo appears on the display, the phone is

in standby mode and ready for use.

Press and hold the On/Off/End keyBto return to standby mode from any menu option.

Security

The phone and SIM card are protected against misuse by several security codes.

Keep these confidential numbers in a safe place where you can access them again if required.m

§Menu§ ¢ ¢Security

¢Codes ¢Select a function.

PIN control

The PIN is usually requested each time the phone is switched on. You can deactivate this feature but you risk unauthor- ised use of the phone. Some service providers do not permit deactivation of the control.

Change PIN

You can change the PIN to any 4 - 8 digit number you may find easier to remember.

Change PIN2

(Displayed only if PIN2 is available.) Proceed as with Change PIN.

Change phonecode

You define and enter the phone code (4 - 8 digits) when calling a phone code protected function (e.g. Direct call, p. 5) for the first time. It is then valid for all protected functions. If it is entered incorrectly three times the phone is locked. Contact the Siemens Service.

Clear SIM card barring

If the PIN is entered incorrectly three times, the SIM card is barred. Enter the PUK (MASTER PIN) provided by your service provider with the SIM card. If the PUK (MASTER PIN) has been lost, please contact your service provider.

Prevent accidental activation

Even if PIN use is deactivated confirmation is required to switch on the phone. This prevents accidental activation of the phone, e.g. when you are