6

Getting Started

 

 

 

Insert SIM card/battery

The service provider supplies you with a SIM card on which all the important data for your line is stored. If the SIM card has been delivered in credit-card size, snap the smaller segment out and remove any rough edges.

• Press latch then slide out and lift up the cover .

•Insert SIM card in the opening and push gently until it engages. (make sure the angled corner is in the correct position, contacts pointing downwards).

• Insert battery into the phone sideways , then press downwards

, until it engages.

• Insert cover as shown . Then press downwards until it engages

.

Only 3 V SIM cards are supported. Older SIM cards (5-volt technology) cannot be used. Please contact your service provider if you have an older card.

Your phone's display and the display cover of the upper case are delivered with a protective film. Remove this film before getting started. In rare cases the static charge created by removing this film may cause discoloration at the edges of the display. How- ever, this will disappear within 10 minutes.