Siemens MCM 1902 !, !

Color monitor MCM 1902

8 - English A26361-K527-Z100-2-5E19

Seeyour PC's operating manual for details of the ports on the system unit.

!Pleasenote the information provided in the "Safety" section in the chapter " Important

notes"at the beginning of this manual.

Donot cover the ventilation openings of the monitor.

Ifyou are assembling monitors beside each other, there must be a minimum distance of

30cm between monitors of the same constructional type, to avoid image distortion. With

differentmonitors, the distance must be increased, if necessary.

1= Powerconnector 2= D-SUBconnector (15-pin)

Ê Be sure that the monitor and the system unit are switched off.

!Thesystem unit's power plug must be pulled out!

Thedata cable supplied has two 15-pin D-SUB connectors for connection to the monitor and to the

systemunit.

!CEconformance and optimum picture quality are guaranteed only if you use the data

cablesupplied.

Ê Connect one of the connectors of the data cable to the D-SUB connector on the monitor (2)

andsecure the connector by tightening the safety screws.

Ê Connect the other connector of the data cable to the active monitor port on the system unit and

securethe connector by tightening the safety screws.

Ifyour system unit has two monitor ports ("onboard" screen controller and separate

graphicscard), the monitor port for the separate graphics card is usually active.