Kachinko System
right (as you look from the front):
Operation
Locate the unit where the front light is clearly visible by the camera.
•Make any necessary connections from the TONE OUT to the camera, if you are not us- ing the camera’s microphone.
•If you are recording the signal with the camera microphone, set the POWER switch to ON (BUZZ), otherwise set it to ON.
•Set the camera iris setting to manual. An automatic setting can overcompensate for the KS
•Make the image of the front light as large as possible by putting the camera close in front of the KS
Set the MODE switch to AUTO. The main light lights, and the beep sounds (or the signal is output through the jacks). The three red LEDs
7
