Wheel & Tiller Shaft Group
REF NO PART NO. | QTY. DESCRIPTION |
11716793SM
21716825SM
2 | 1716826SM |
2 | 1716827SM |
2 | 1716828SM |
21716829SM
31716810SM
41716824SM
51716816SM
61716815SM
6 | 1716817SM |
6 | 1716818SM |
6 | 1716819SM |
61716820SM
71716830SM
81716791SM
91716809SM
101716821SM
111716797SM
121716814SM
131716812SM
141716813SM
151716823SM
161716822SM
1 CAP, Rear Bearing
1 SHIM SET, Rear Bearing Cap
1SHIM, 0.062 Thickness x 1 3/4" (As Required)
1SHIM, 0.030 Thickness x 1 3/4" (As Required)
1SHIM, 0.015 Thickness x 1 3/4" (As Required)
1SHIM, 0.010 Thickness x 1 3/4" (As Required)
2BEARING, Tappered ( Cone & Race )
4 | SPACER, 1" x 1 1/4" x 0.062 Thickness | |
4 | BUSHING | |
4 | SHIM SET, Axle Spacer | |
1 | SHIM, 0.062 Thickness x 1 3/8" | |
1 | SHIM, 0.030 Thickness x 1 3/8" | |
1 | SHIM, 0.015 Thickness x 1 3/8" | |
1 | SHIM, 0.010 Thickness x 1 3/8" | |
4 | RING, Snap Internal Retainer | |
4 | SEAL, Housing | |
1 | SHAFT, Main Drive | |
2 | RING, Snap External Retainer | |
1 | Reproduction | |
SEAL, Oil Drive Shaft | ||
1 | GEAR, Worm Wheel Shaft | |
1 | SHAFT ASSEMBLY, Wheel w/Lock Pin 5HP | |
2 | KEY, Parrallel Pin | |
1 | GEAR, Worm Shaft | |
1 |
| for |
SHAFT ASSEMBLY | ||
Not |
| |
Footnotes
The above parts group applies to the following Mfg. Nos.:
1693704 - 616RT
© Copyright 2009 by Briggs & Stratton Corporation | 13 |
|
Milwaukee, WI, USA. All rights reserved | TP |