Transmission Assembly
REF NO PART NO. | QTY. DESCRIPTION |
11716793SM
21716825SM
2 | 1716826SM |
2 | 1716827SM |
2 | 1716828SM |
21716829SM
31716810SM
41716824SM
51716816SM
61716815SM
6 | 1716817SM |
6 | 1716818SM |
6 | 1716819SM |
61716820SM
71716830SM
81716791SM
91716809SM
101716821SM
111716797SM
121716814SM
131716811SM
131716812SM
141716813SM
151716823SM
161716822SM
1 CAP, Rear Bearing
1SHIM SET, Rear Bearing Cap (Includes the following) SHIM, 1.750 OD x .062" thick (As req'd.)
SHIM, 1.750 OD x .030" thick (As req'd.) SHIM, 1.750 OD x .015" thick (As req'd.) SHIM, 1.750 OD x .010" thick (As req'd.)
2BEARING, Tapered (Includes Cone & Race)
4 SPACER, 1.250" x 1.000" x .062" thick
4 BUSHING
4SHIM SET, Axle Spacer Kit (Includes the following) SHIM, 1.375 OD x .062" thick (As req'd.)
| SHIM, 1.375 OD x .030" thick (As req'd.) | |
| SHIM, 1.375 OD x .015" thick (As req'd.) | |
| SHIM, 1.375 OD x .010" thick (As req'd.) | |
4 | SNAP RING, Retainer, Internal | |
4 | SEAL, Tiller Housing | |
1 | MAIN DRIVE SHAFT | |
2 | SNAP RING, Retainer, External | |
1 | Reproduction | |
OIL SEAL, Drive Shaft | ||
1 | GEAR, Worm, Wheel Shaft | |
1 | WHEEL SHAFT ASSEMBLY, Lockpin Model 413RT Only | |
1 | WHEEL SHAFT ASSEMBLY, Lockout Model 516RT Only | |
2 | KEY, 1/4" x 1" | |
1 |
| for |
GEAR, Worm, Tiller Shaft | ||
1 | TILLER SHAFT ASSEMBLY | |
Not |
| |
Footnotes
The above parts group applies to the following Mfg. Nos.:
1692876 - 413RT
1692877 - 516RT
© Copyright 2009 by Briggs & Stratton Corporation | 15 |
|
Milwaukee, WI, USA. All rights reserved | TP |