3.7
Needle Attachment
Caution
Choose a proper needle size according to the count of thread and the type of sewing material used.
The power supply should be cut off before attaching the needle.
Turn the hand wheel until the needle bar reaches the highest point of its stroke (Figure 12).
Loosen screw ‘2’ and hold needle ‘1’ with its indented part ‘A’ facing exactly to the right in direction ‘B’.
Insert the needle in the direction
of the arrow until it will go no fur- ther.
Tighten the screw ‘2’.
Make sure the long groove ‘C’ of the needle is facing exactly to the left in direction ‘D’.
Figure 12
High Speed Straight Lockstitch Sewing Machine Instruction Manual and Parts List 10