Sioux Tools 5050N5051AL5050AL manual Model 5050N5051Al5050AL Form # Z356D

Model 5050N5051Al5050AL Form # Z356D

Serial "C"

1/2" Pistol GripTwin

Hammer ImoactWrenches

-

Operator Instructions

Includes -ForeseenUse, Work Stations, Putting Into Service,

Operating, Dismantling,Assembly and Safety Rules.

Sioux Tools, Inc.

117 Levi Drive

Murphy, NC 28906

U.S.A.

Tel No. 828.835-9765	Fax No. 828-835-9685
Product Net Weight	Recommended Use Of
5050N5051A 5050AL	Balancer Or Support

5.605.80 Ibs

2.502.60 Kq

Air Pressure

Recommended Working 6.2 bar 90 PSI

Maximum		6.2	bar 90 PSI
		A	i
SAFETY MESSAGES			WARNING
Peisonaf Safety Equipment			Always Read Instructions
Use -Safety Glasses	YES		~eforeusing -TOOIS
		@ NGw-v
Use - Safety Gloves
Use - Safety Boots			Wear HearingProtection
Use-Breathing Masks
Use - Ear Protectors			Amid Prolonged Exposure
	YES	A mmm

Important

Read these instructions carefully before installing,operating, servicing orrepairingthis tool. Keepthese instructionsin a safe accessible place.

ProdudTypef

1/2" Pistol GripTwin

Hammer ImpactWrenches

Model No/Nos Serial No.

5050A Chrome Nose Case

5051A Black Nose Case

5050AL 2" Ext. Anvil

Recommended Hose Bore		RecommendedMax.
Size - Minimum		Hose Length
3/8ins	1 0 m m	30Ft	1 0 M

Noise Level: Sound Pressure Level 89.0 dB{A) Sound Power t-evet 100.0<tB{A)

Test Method: Tested in accordance with Pneurop test code PN8NTC1 and I S 0 Standard 3744

Vibration Level (5050A15051A) 4.0 Meters 1Sec2

(5050AL) 4.3 Meters I Sec2

Test Method: Tested in accordance with I S 0

standards 8662 Parts 1 & 7

Safety rules when using 5050A,		away from the working attachment fixed to the tool.
5051A and 5050AL ImpactWrenches		-Thetool is not electrically insulated. Never use the too)
		if there is any chance of coming into contact with live
- Use only impact socketsandextensions, universaljoints,
		electricity.
etc. ratedasbeingsuitablefar use with impactwrenches.		-Always when using the tool, adopt a firm footing and/or
- Prolonged exposure to vibrationmay cause injury.		positionandgrip the tool sufficiently only to overcome any
-Readall instructions before using this toot. Ail		reaction forces that may result from the tool doing work.
operators must be fuHy trained in its use and aware of		Do not overgrip.
these safety rules.		-Useonly correct spare parts for	maintenance and
- Do not exceed the maximumworking air pressure.		repair. Do not improvise or make temporary repairs. Major
- Use personal protectionequipment as recommended.		servicing and repairs should only be carried out by
- Some dust created by power sanding, sawing, grinding,		persons trained to do so.
drilling, and other construction activities contains		-Donot lock, tape, wire, etc. the 'On/Off' valve in 'On'
chemicals knownto cause cancer, birthdefects and other		position. The trigger/lwer, etc. must always be free to
reproductive harm.		return to the 'Off'position when released.
-Useonly compressed air at the
recommendedconditions.
-If the tool appears to malfunction,	ft! Pipa And Fittings
remove from use immediately and
arrange for service and repair. If itis not	swH	bw
practical to remove too! from service,
then shut off the air supply to the tool
and write OF have writtenawarningnote
and attach it to the toot.
- If tool is to be used with a balancer or
other suspension device, ensure that
the tool is firmly attached to the
suspensiodsupportdevice.
W h e n operating the tool, always keep
the body and particularly the hands	RecommendedAir Supply System		Figure 1

Page No 1