19 English
User Controls
User Controls
Auto Signal Detect
Auto Signal Detect enables the sequential searching of input
connectors for a signal.
Onscanstheinputssequentiallyuntiltherstinputsignalis
found.
Off keeps the signal detection in one input connector.
Lamp Reminder
Select this option to show or to hide the warning message when the
“change lamp” message displays. The message appears 100 hours
before the recommended lamp replacement.
Lamp Mode
To adjust the brightness of the image:
Select Standard to brighten the image.
Select Economy to darken the image.
Auto Power Off (minutes)
Set the countdown timer interval. The countdown timer starts when
there is no signal being sent to the projector. The projector enters
IdleModewhenthecountdownnishes.
Ifuserwishestore-starttheprojector,pleasepoweronthe
projector again.
Default
Settings