INSTALLING AND CONFIGURING NETWORK DRIVERS

5.At this point, a protocol must be bound to the driver. For example:

BIND IPX TO SMCPWR2 NET=XX

where xx is the logical network address for the frame type indicated in your load command.

Driver Command Line Parameters

Optional command line parameters are described in the NetWare v3.12 server driver installation document on the SMC SuperDisk.

Note that the EtherPower II 10/100 network card is preprogrammed with Auto-Negotiate on the UTP port as the default configuration. The preprogrammed configuration can be changed by running EZStart. Some command line parameters are used to override the default configuration. In the absence of such parameters, the default configuration will be used by the NetWare driver.

3-14