Snapper XL Series manual Seat Adjustment, Hopper Latch Adjustment

Troubleshooting, Adjustment, & Service

SEAT ADJUSTMENT

Pitch Adjustment

The pitch of the seat can be adjusted to one of three positions. To adjust, remove the carriage bolts, spacers, washers, and nuts (B, Figure 28) from the hinge and reinstall them in the desired holes.

Seat Slide Adjustment

The seat can also be adjusted forward and back. Move the lever (A, Figure 28), position the seat as desired, and release the lever to lock the seat into position.

Seat Spring Adjustment

The seat springs (C, Figure 28) can be adjusted to pro- vide a softer or firmer ride. Tilt the seat forward and slide the spring assembly (C) forward for a softer ride, and back for a firmer ride.

HOPPER LATCH ADJUSTMENT

If the hopper will not latch when the lever is quickly closed, the latch clearance may need to be adjusted. Loosen the capscrews (A, Figure 29) and adjust the plates on both sides of the back plate as needed.

C

A

B

Figure 28. Seat Adjustment

A.Seat Adjustment Lever

B.Carriage Bolt, Spacer, Washer, & Nut

C.Seat Spring

A

Figure 29. Left Rear Wheel Well

A. Hopper Latch Capscrews

28