Dimensions:
• 19.5” Wide • 7.75” High • 11” Deep
Premier Series IC-D7
FOR BUILT-IN CABINETS, A UTILITY VERSION OF
THE ACCLAIMED D7 TOWER
The unique cabinet design, placement switch and wide dispersion tweeter of the IC D7 bring the performance of a freestanding high-end tower to an in-cabinet bookshelf enclosure. Conventional bookshelf loudspeakers sound “chesty” and image poorly when used in in-cabinet applications. The IC D7 is a 6.5-inch, D’Appolito Array, designed by Snell chief engineer, Joe D’Appolito, to fit into furniture and millwork, and, is tuned to compensate for the sonic problems that these cabinet boundaries
cause. The twin 6.5-inch long throw woofers provide extended bass and plenty of output, while the 1-inch low- resonance, silk dome tweeter enables a large sweet spot for better stereo imaging. The IC D7 uses the same components as the Snell D7 Tower and IW D7 in-wall monitor, mounted in a robust, texture-painted enclosure. This high output LCR can be used for Left, Center and Right or mixed and matched with these two siblings to provide clean, impactful sound with an effortless and “airy” soundstage… perfect for music and movies.
Application Alternatives: | | System Suggestions: | |
| | | |
| D7 In Room | | |
IW-D7 In Wall | | IC Basis 300 Sub | SR7 Surround |
| | | |
Like all Snell loudspeakers, each IC-D7 is hand tuned for natural imaging and sonic depth.
Design: | Tweeter |
Acoustic Suspension | 1-inch SEAS silk dome |
D’Appolito array | |
| Woofer |
Frequency Response | Two 6.5-inch Copolymer cone, |
62Hz-20kHz ± 3dB | 6mm Excursion |
Sensitivity | Crossover Frequency |
[1Watt (2.83v) @ tm] | 2.2 kHz |
90 dB | |
| Crossover |
Impedance | Discrete tweeter, and woofer |
Nominal 4 Ohms | circuit boards. Time alignment |
| and coherency are achieved |
Maximum Output | through the transition region from |
110 dB | driver to driver. Each crossover is |
| individually tuned by our |
Recommended Power | technicians to ± 0.5db of the |
50 Watts minimum | Master Reference. |
250 Watts maximum | |
Boundary compensation "Normal" – When placed on stands away from wall.
"Boundary"– When placed on shelf or near wall.
Wiring
Bi-amp, bi-wire ready
Connections
5-way satin, nickel-plated, brass terminals, accepts 5/16 - inch spades, pins, banana plugs and bare wire to 12 gauge.
Cabinet Construction
Hardwood veneer over 3/4-inch MD Panels. 3/4 -inch textured painted.
Grille
Black cloth over MDF frame.
Finishes
Textured black paint. Can be ordered in most wood and paint finishes.
Weight
30 lbs.
Manufactured in the USA by Snell Acoustics, Peabody MA 01960 • www.snellacoustics.com • 978-538-6262 • © Snell Acoustics, Inc • All specifications subject to change without notice.
