Premier Series IW-LCR7

SNELL’S 3rd GENERATION IN-WALL LCR, A ZERO COMPROMISE MUSIC AND THEATER MONITOR.

In 1990, Snell built the world’s first fully enclosed in-wall LCR. Like better freestanding monitor’s it had accurate, predictable bass, pinpoint imaging, detail, and startling dynamics. Unlike all open-backed in-walls it minimized sound leakage to adjacent rooms, and was a very competent alternative to bulky, obtrusive in-room speakers… and it smoked! Two generations later, Snell’s chief engineer, Joe D’Appolito reconfigured the 800 Series to feature his famous D’Appolito Array. The Snell IW-LCR7 borrows the 5 1/4 D’Appolito Array from its in-room brother, the LCR7, which includes two very long ex-cursion woofers mounted over and under a low resonance 1-inch silk dome tweeter. The result is a design that aligns the output from all three drivers to a single point, for remarkable clarity and soundstage. Other features include Snell’s three-layer baffle for reduced wall resonance, and high order crossover for reliable hi-output use. Like all Snell speakers the IW- LCR7 is hand-tuned to match its reference master by .5dB.

Application Alternatives:
System Suggestions:

 

OH-LCR7

 

 

 

 

 

 

 

LCR7 In Room IC-LCR7 In Cabinet
IW BASIS 300 IW SR30 Surround
In-Ceiling

 

 

Subwoofer

 

Dimensions:

Dimensions:

Finish
Rough
23 1/4” High

22”

High
13 1/4” Wide

12”

Wide
3 3/4” Deep

 

 

Like all Snell loudspeakers, each IW-LCR7 is hand tuned for natural imaging and sonic depth.

Design:
Woofer
Connections
Grille

Infinite Baffle, Back-Boxed,

Two 5.25-inch copolymer cone

Spring loaded gold-plated

Perforated steel with white

“D’Appolito” In-Wall LCR

5mm excursion

terminals, accepts pins,

powder coat paint.

Frequency Response
Crossover Frequency

banana plugs and bare wire to

 

70Hz-20kHz +3dB

2.0 kHz

12 gauge.

Finishes
Sensitivity
Crossover
Cabinet Construction

Paintable white finish.

[1 Watt (2.83v) @ 1m] 89 dB

Discrete tweeter, and woofer

Enclosure – Solid aluminum

Can be ordered in most

Impedance

circuits. Time alignment and

cabinet with full bracing and

paint finishes.

Nominal 4 Ohms

coherency are achieved

asphalt damping. Baffle –

Weight
Maximum Output

through the transition region

QuietBoxTechnology™ Hi-loss

19 lbs.

110 dB

from driver to driver. Each

damping adhesive

 

Recommended Power

crossover is individually tuned

sandwiching two layers of 1/4-

 

50 Watts Minimum

by our technicians to ± 0.5db of

inch MDF. Mounting system –

 

250 Watts Maximum

the Master Reference.

Eight "dog-leg" clamps for

 

Tweeter

 

mounting surfaces 1/2 to 1 1/2-

 

1-inch SEAS silk dome

 

inch thick.

 

Manufactured in the USA by Snell Acoustics, Peabody MA 01960 • www.snellacoustics.com • 978-538-6262 • © Snell Acoustics, Inc • All specifications subject to change without notice.