English / USA
4
133BA027 KN
:Remove the tensioning gear (4) and turn it over.
5
133BA028 KN
:Unscrew the nut (5).
4
7
| 6 | |
8 | KN | |
133BA029 | ||
|
:Position the tensioning gear (4) against the guide bar (6) so that the stud (7) projects through the upper hole and the short guide peg (8) locates in the lower hole.
5
133BA030 KN
:Screw the nut (5) on to the stud as far as stop.
4 | KN | |
133BA031 | ||
|
Wear work gloves to protect your hands from the sharp cutters.
:Fit the chain – start at the bar nose. Pay attention to the position of the tensioning gear and the cutting edges.
:Turn the tensioning gear (4) clockwise as far as stop.
30 | MS 270, MS 270 C, MS 280, MS 280 C |