Inserting batteries into the remote

Insert two R6 (size-AA) batteries in the RM-AAU006 remote commander.

Observe the correct polarity when installing batteries.

Notes

•Do not leave the remote in an extremely hot or humid place.

•Do not use a new battery with old ones.

•Do not mix alkaline batteries and other kinds of batteries.

•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

•If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Tip

Under normal conditions, the batteries should last for about 3 months. When the remote no longer operates the receiver, replace all the batteries with new ones.

6:Calibrating the appropriate settings automatically(AUTO CALIBRATION)

This receiver is equipped with D.C.A.C. (Digital Cinema Auto Calibration) Technology which allows you to perform automatic calibration as follows:

•Check the connection between each speaker and the receiver.

•Adjust the speaker level.

•Measure the distance of each speaker to your

listening position.

You can also adjust the speaker levels and balance manually. For details, see

“7: Adjusting the speaker levels and balance (TEST TONE)” (page 27).

Before you perform AutoCalibration

 

 

DISPLAY DIMMER

 

 

2CH

A.F.D.

MOVIE

MUSIC

?/1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AMP MENU ENTER

 

 

 

MASTER

 

 

 

 

 

 

 

 

 

VOLUME

AUTO CAL MIC

MEMORY

PRESET TUNING

+

 

 

 

 

 

 

 

 

 

VIDEO 1 VIDEO 2 DVD SA-CD/CD

FM

AM

 

 

 

 

 

FM MODE

TUNING

+

 

 

 

 

 

 

PHONES

 

 

 

 

 

INPUT MODE

 

 

 

1

1 Connect the supplied ECM-AC2 optimizer microphone to the AUTO CAL MIC jack.2 Place the optimizer microphone at your listening position.3 Place the speakers so that the speakers are facing the optimizer microphone.

24GB