4 GB
Start-up Guide1: Checking the accessories
Mains lead (1) (only for KDL-46EX4xx)
Cable holder (1) (only for KDL-40/32NX5xx)
Stand (1)*
Screws for stand (4) (only for KDL-46EX4xx)
Screws for stand (4 + 3) (only for KDL-40BX4/EX4xx,
KDL-37EX4xx, KDL-32BX3/BX4/EX3/EX4xx, KDL-
26EX3xx, KDL-22EX3xx)
Screws for stand (4 + 4) (only for KDL-40/32EX6xx,
KDL-40/32NX5xx)
Remote RM-ED022 (1)
Remote RM-ED036 (1) (only for KDL-40/32EX6xx)
Size AAA batteries (2)
* Disassembled except for KDL-46EX4xx.

To insert batteries into the remote

(only for KDL-40/32EX6xx)
~
• Observe the correct polarity when inserting batteries.
• Do not use different types of batteries together or mix
old and new batteries.
• Dispose of batteries in an environmentally friendly way.
Certain regions may regulate disposal of batteries.
Please consult your local authority.
• Handle the remote with care. Do not drop or step on it,
or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat source,
a place subject to direct sunlight, or a damp room.
2: Attaching the stand
Follow the assembling steps required to place on a
TV stand.
1Refer to the supplied Table-Top Stand
leaflet for proper attachment for some TV
models.
2Place the TV set on the stand. Take care
not to interfere with cables.
3Fix the TV to the stand according to the
arrow marks that guide the screw
holes using the supplied screws.
~
• If using an electric screwdriver, set the tightening torque
at approximately 1.5 N·m (15 kgf·cm).
Only for KDL-22EX3xx
030STU.fm Page 4 Tuesday, January 12, 2010 10:03 AM