Sony 4-296-436-11 (2) Setting Key Transitions, Selecting the Pattern and Direction for Key Wipes, Making Detailed Adjustments to Key Wipe Patterns, Setting Key DME Wipes

II-20 Setting Keys

Chapter 2 Video Switching

Transition execution j

Key transition

Material selection

Transition configuration j

Key configuration j

Transition execution j

Setting Key Transitions

Set the key transition rate and key transition type for when

a key transition is performed.

You can select any of the following transition types.

Cut: Quickly insert (cut in) or remove (cut out) the key.

Mix: Gradually insert (fade in) or remove (fade out) the

key.

Wipe: Use the wipe to cut out the background and then

embed a key.

DME (Digital Multi Effects): Use a DME effect and

apply the same effect as the DME wipe to the key (key

DME wipe).

Settings menu: [Key Transition] (page II-23)

Selecting the Pattern and Direction for Key Wipes

You can cut out the background from a wipe pattern

selected for a key transition and then embed a key.

Settings menu: [Key Wipe Modify] (page II-24)

For details on the wipe directions, see “Selecting the Pattern and Direction

for Wipes” (page II-11).

For details on the wipe pattern numbers, see “Effect Pattern List” (c Basic

Operation).

Making Detailed Adjustments to Key Wipe Patterns

You can set the position of a wipe pattern, and apply

various variations and modifiers in [Key Wipe].

To display the [Key Wipe] menu

Display the [Key] menu, turn the V1 knob to select [Key

Wipe], and press this knob.

The setting items in the [Key Wipe Modify] menu are the same as those of

[Wipe Modify] in the [Effect] menu. For details on the setting items, see the

corresponding sections of “Making Detailed Adjustments to Wipe Patterns”

(page II-11).

Setting Key DME Wipes

For a key, you can make the same settings as with DME

wipe.

Settings menu: [Key DME Wipe] (page II-24)

For details on the DME wipe directions, see “Selecting the Pat tern and

Direction for Wipes” (page II-11).

For details on the wipe pattern numbers, see “Effect Pattern List” (c Basic

Operation).

Execute the transition using the fader lever, CUT button,

or AUTO TRANS button.

Press the KEY bus delegation button.

Select the video for program output.

Select the key material (i.e., the image to be

superimposed on the program video output).

1)Use the [Key] m enu.

Set the transition type for the key transition.1)

Select the pattern and direction for the key wipe or key

DME wipe if necessary.1)

Select the key type.

Make detailed adjustments to the key if necessary.

Execute the transition using the KEY TRANS button.